![]() |
![]() ![]() ![]() |
Amplifiers Experience
the reality of a live performance in your
living
room with the superb clarity of Maestro Audio precision
amplifiers.
Maestro amplifiers are designed as a fully symmetrical pure Class A configuration, carefully assembled with the highest quality of selected electronic components and materials. ![]() To complement the pure audio reproduction characteristics of a high-power Class A design, the closely-matched, low-noise, audio-grade Mosfet Transistors are backed by separate high-current low-impedance toroidal power supplies. The busbars are constructed from gold-plated 6mm solid copper rails to ensure the best conductivity and preventing ageing and deterioration. ![]() The end-result is an amplifier with a warm natural sound, the pace and power to keep up with the fastest and most harmonic-compounded musicals whilst being able to reproduce the most delicate details in sound and ambience. The closely matched dual monoblock layout, ensures pinpoint accurate imaging yet filling the room with sound. All amplifiers can be switched to Class AB operation for reduced heat generation. All Maestro products are specialised, handcrafted, personally tested equipment, and therefore only manufactured on order. Maestro A220 and A220s - 220W Monoblock amplifiers These amplifiers were designed for use next to the loudspeakers, enabling the use of short loudspeaker cables to minimise audio detail losses and make optimum use of the amplifier's high damping factor. On the A220 amplifiers, the bi-wire loudspeaker connectors are wired with separate optimized Ecosse SMS4.7 SuperMonocrystal™ ultra-pure Copper cables for low and high frequencies and both audio inputs are wired with 'Master Reference' Monocrystal™ ultra-pure Copper cable. The A220s amplifiers are manufactured with WBT Signature Silver connectors wired with Ecosse 'The Legend' Ultra-Pure Monocrystal™ Silver interconnect cable and 'US2 Ultima' ultra-high purity Monocrystal™ Silver speaker wire. ![]() Specifications Output
Power:
220W rms into
8ohms, 440W into 4
ohms, 880W into 2 ohms.
Signal to noise: >110dB Damping factor: >1600 Input sensitivity: 1.2 Volt rms Input impedance: 33k ohm Frequency Response: 10Hz to 400kHz, -0.1dB Slew Rate: >75V/uS Weight: 34.5kg each Dimensions: (H x W x D) 435mm x 215mm x 460mm ![]() Maestro A160 - 160W Dual-Mono amplifiers This amplifier uses exactly the same circuitry as the monoblocks, built into a single enclosure for use in Hi-Fi stands. The bi-wire loudspeaker connectors are wired with separate optimized Ecosse Monocrystal™ ultra-pure Copper cables for low and high frequencies. ![]() ![]() Specifications Output
Power:
2 x 160W
rms into 8ohms, 2 x 320W
into 4 ohms,
2 x 640W into 2 ohms. Signal to noise: 110dB Damping factor: >1400 Input sensitivity: 1.1 Volt rms Input impedance: 33k ohm Frequency Response: 10Hz to 400kHz, -0.1dB Slew Rate: >75V/uS Weight: 35.5kg Dimensions: (H x W x D) 220mm x 436mm x 435mm Maestro A120 - 120W Dual-Mono amplifiers This amplifier also uses exactly the same circuitry as the monoblocks, built into a single enclosure for use in Hi-Fi stands. The bi-wire loudspeaker connectors are wired with separate optimized Ecosse Monocrystal™ ultra-pure Copper cables for low and high frequencies. ![]() ![]() Specifications
Output Power:
2 x 120W
rms into 8ohms, 2 x
240W into 4 ohms,
2 x 480W into 2 ohms. Signal to noise: 110dB Damping factor: >1400 Input sensitivity: 1.0 Volt rms Input impedance: 33k ohm Frequency Response: 10Hz to 400kHz, -0.1dB Slew Rate: >75V/uS Weight: 28kg Dimensions: (H x W x D) 220mm x 436mm x 435mm (All rights reserved. Maestro Audio reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.) |
|